Rev'It! Control Air H2O Jacket
For sport street riders looking for a heavily ventilated jacket (with a waterproofing component) that also want the aesthetic of speed wrapped into a CE-class AA jacket, we bring you the Control Air H2O.
Its own vibe
When we created the Control Air H2O jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past - where any item in a “family” of jackets/pants/one-pieces - echoed almost identical aesthetics, we did something new. The Control Air H2O jacket is not a direct copy of leather series (jacket and one-piece suit); however, we took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way at the back of the arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.
Stay cool. Stay dry.
The Control Air H2O is heavily ventilated - think about 2/3 (or slightly more) of the front constructed with PWR|Shell mesh, and about the same ratio around back. That said, we recognize not every day will be as hot as another. For the days when you need some protection against the wind and rain, we included a separately wearable hydratex 2L waterproof membrane.
Features:
FIT OF THIS PRODUCT
Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
COMFORT FEATURES
Adjustability
Adjustment strap at waistAdjustment tab at upper arm
Pockets
Two slit pockets on frontWaterproof inner pocket within waterproof linerThe internal pocket within the waterproof liner is waterproof.
Lining
Mesh
Features
Jeans loopThe loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.Short connection zipperSoft edge at collarFor extra comfort, the inside of the collar is covered with a soft fabric.
CLIMATE REGULATION
Waterproofing
Detachable hydratex|Lite liner
Ventilation
Fully ventilated mesh
PROTECTION IN THIS PRODUCT
3D mesh protector pocketsReady for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.Prepared for SEESOFT CE-level 2 Insert Back ProtectorThe back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.SEESMART CE-level 1 Elbow ProtectorsSEESMART CE-level 1 Shoulder ProtectorsTPU protection at shoulder
Outer shell material
High density polyester 600DThis fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.Polyester ripstopPWR|Shell meshThis PWR|Shell is knitted in an open structure, to allow for breathability and flexibility, which maintains comfort as well as safety.
Visibility
Laminated reflection on backReflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
